Lead sheet welding basic


The purpose of training delivered against this standard is to provide candidates with an introduction to basic lead sheet welding.


Minimum 2.5 days of 6 learning hours per day.

Purpose/ scope

The purpose of training delivered against this standard is to provide candidates with an introduction to basic lead sheet welding.

The scope includes:

  • Hazards associated with working with lead sheeting
  • Advantages and disadvantages of welding over bossing
  • Tools and equipment used for welding
  • Forming basic lead work details and joints using welding equipment.

Occupational relevance

Training delivered against this standard is relevant to the following occupational group(s):

  • Operative and craft
  • Supervision.

Candidate pre-requisites

There are no candidate pre-requisites as part of this standard. However a basic knowledge of roofing terminology and techniques would be beneficial.

Instruction/ supervision

As a minimum, course instructors must be able to demonstrate that, in relation to this standard, they have:

  • A train the trainer or instructional techniques course certificate
  • Successfully completed training to this standard
  • At least 2 years relevant industrial experience
  • A verifiable CV.


Delivery may be in an on or off the job environment.

All materials and equipment must be of a suitable quality and quantity for candidates to achieve learning outcomes, and must comply with relevant legislation.

The class size and candidate/instructor ratio must allow training to be delivered in a safe manner and enable candidates to achieve the learning outcomes.

At least 80% of the training must be practical activities.


Methods of assessment considered appropriate for training delivered against this standard are:

Practical assessment: off the job simulated environment using test pieces.

Quality assurance

Quality assurance against this standard will require initial approval of the training organisation and their content mapped to the standard.

CITB will also conduct an approval intervention, either desk-based or centre visit, to ensure the training organisation can meet the requirements of the training standard.

Approved training organisations will be required to present information on records of training and assessment upon request to CITB for desk based analysis. They will also be visited annually by the CITB quality assurance team.


There are no mandatory renewal or recommended refreshment requirements for this standard.

Approval date

17th November 2017

Review cycle

Either on request or in 3 years from approval date.

Learning outcomes 


The candidate will be able to:

Additional guidance to support learning outcome

Identify the hazards and risks associated with lead sheeting and the precautions to be observed.

Lead Sheet training academy health and safety

Control of Lead at Work (third edition) - Control of Lead at Work Regulations 2002 Approved Code of Practice and Guidance (ISBN 0-7176-2565-6) 

HSE Working safely with lead 

BS EN 12588 - Lead and lead alloys. Rolled lead sheet for building purposes


Describe the advantages and disadvantages of welding over bossing  
Identify the tools and equipment commonly used in welding  

Use welding equipment to form lead sheet