PCA qualified technician training (structural waterproofing)

Standard details

This training standard includes the standard for the Structural Waterproofing PCA Technicians Course. This standard is in development and will be published shortly.

CITB has developed this standard in discussion with industry


Minimum 1 day of 6 learning hours


The purpose of training delivered against this standard is to provide candidates with knowledge of structural waterproofing aspects of the building preservation industry.

The scope of this standard covers:

  • construction and use of basements
  • BS 8102:2009 Principles of waterproofing
  • sources and remedying damp in basements
  • water movement and water pressure
  • type A (barrier), B (integral), and C (drained cavity) forms of waterproofing
  • waterproofing types strengths and challenges
  • installation and combination of various systems
  • importance of correct preparation and application
  • site safety, waste disposal, and implications of poor site practice.

Occupational relevance

Training delivered against this standard would be relevant to the following occupational groups:

  • operative and craft
  • supervision.

Candidate pre-requisites

There are no candidate pre-requisites as part of this standard. However, candidates should have some technical or practical experience of working in a related environment.


As a minimum, course instructors must be able to demonstrate that, in relation to this standard, they have:

  • A train the trainer or instructional techniques course certificate
  • Successfully completed training to this standard 
  • At least 2 years relevant industrial experience
  • A verifiable CV.


The following method may be used in the delivery of this standard:

  • classroom
  • e-learning
  • blend of classroom and e-learning

All materials and equipment must be of a suitable quality and quantity for candidates to achieve learning outcomes, and must comply with relevant legislation.

The class size and candidate/instructor ratio must allow training to be delivered in a safe manner and enable candidates to achieve the learning outcomes.

This standard is considered to contain 51 per cent or more theoretical learning.


For the successful completion of training, candidates must complete an end of course practical assessment or knowledge test that measures the learning outcomes and has a pass or fail criteria.

Quality assurance

Quality assurance against this standard will require initial approval of the training organisation and their content mapped to the standard. 

CITB will also conduct an approval intervention, either desk-based or centre visit, to ensure the training organisation can meet the requirements of the Training Standard. 

Approved training organisations (ATOs) will be required to present information on records of training and assessment upon request to CITB for desk-based analysis. They will also be visited annually by the CITB quality assurance team.


There are no mandatory renewal or recommended refreshment requirements for this standard.

Approval date

November 2018

Review cycle

Either on request or in 3 years from approval date.

Learning outcomes

The candidate will be able to:

  • Describe the construction and use of basements
  • Describe the principles of waterproofing including defects and maintenance as per BS 8102:2009
  • Describe the sources and remedying of damp in basements: rising damp and condensation
  • Describe water movement and water pressure
  • Describe different methods of type A barrier waterproofing
  • Describe different methods of type B integral waterproofing
  • Describe different methods of type C drained cavity waterproofing
  • Describe waterproofing types strengths and challenges
  • Describe the installation and combination of various systems
  • Describe the importance of correct preparation and application
  • Describe site safety, waste disposal, and implications of poor site practice.

Additional information about this standard

Health & Safety Executive (HSE) confined spaces

Health & Safety Executive (HSE) chemicals

British standards

Find out more about British Standards

  • BS 8102:2009 Code of practice for protection of below ground structures against water from the ground
  • BS 5930:2015 Code of practice for ground investigations
  • BS 5250:2011 Code of practice for control of condensation in buildings
  • BS EN 1997-1:2004+A1:2013 Eurocode 7. Geotechnical design. General rules
  • PAS 00064-2013 Mitigation and recovery of water damaged buildings – Code of practice
  • BS 85500:2015 Flood resistant & resilient construction. Guide to improving flood performance of buildings


  • CIRIA C139 – Water resisting basements


See government legislation in detail

  • Building and Buildings, England and Wales: The Building Regulations 2010.
  • The Building (Scotland) Regulations 2004
  • Statutory Rules of Northern Ireland
  • Conservation (Natural Habits etc) Regulations 1994
  • Control of Pesticides Regulations 1986
  • Control of Substances Hazardous to Health Regulations (COSHH) 2002
  • Construction (Design and Management) Regulations (CDM) 2007
  • Management of Health and Safety at Work Regulations 1999
  • Wildlife and Countryside Act 1981
  • Control of Asbestos Regulations 2012
  • Health and Safety at Work etc Act 1974