CITB has developed this standard in discussion with industry
Minimum 1 day of 6 learning hours
This training standard is an introduction to the constituents of concrete and their impact on the strength, durability, handling and placing of concrete.
- reinforcement including fibres
- specification for strength, durability
- rheology, handling and placing
- testing fresh and hardened concrete.
Training delivered against this standard would be relevant to the following occupational group(s):
- operative and craft
- management and leadership.
There are no candidate pre-requisites as part of this standard. However a basic knowledge and experience of concrete would be beneficial.
As a minimum, course instructors must be able to demonstrate that, in relation to this standard, they have:
- a train the trainer or instructional techniques course certificate
- successfully completed training to this standard
- at least 2 years relevant industrial experience
- a verifiable CV.
Delivery may be in a classroom environment.
All materials and equipment must be of a suitable quality and quantity for candidates to achieve learning outcomes, and must comply with relevant legislation.
The class size and candidate/instructor ratio must allow training to be delivered in a safe manner and enable candidates to achieve the learning outcomes.
This standard is considered to contain 51% or more theoretical learning.
For the successful completion of training, candidates must complete an end of course practical assessment or knowledge test that measures the learning outcomes and has a pass or fail criteria.
Quality assurance against this standard will require initial approval of the training organisation and their content mapped to the standard.
CITB will also conduct an approval intervention, either desk-based or centre visit, to ensure the training organisation can meet the requirements of the training standard.
Approved training organisations (ATOs) will be required to present information on records of training and assessment upon request to CITB for desk based analysis. They will also be visited annually by the CITB quality assurance team.
There are no mandatory renewal or recommended refreshment requirements for this standard.
Either on request or in 3 years from approval date.
|The candidate will be able to: ||Additional guidance to support learning outcome
|Describe effects on strength and durability
||Effects of changes in cement content and type, water content, use of admixtures etc
|Describe placing and handling of concrete in relation to consistence
||Pumping, skip, slip-form, chute sprayed etc
|Explain test methods and outcomes
Additional information about this standard
BS EN 12350
BS EN 12390
BS EN 12620
Concrete Society guidance:
TR 74 Cementitious materials
GCG 8 Concrete practice
Health & Safety Executive (HSE) guides:
Health & Safety at Work etc Act 1974
Health and safety in construction
Personal protective equipment a brief guide
- Health and Safety at Work etc Act (HSWA) 1974
- The Work at Height Regulations (WHR) 2005
- Work at Height (Amended) 2007
- Personal Protection Equipment (PPE) Regulations 2002
- Personal Protection Equipment (PPE) at Work Regulations 1992
- Provision and Use of Work Equipment Regulations (PUWER) (1998 UK 1999 NI)
- Control of Substances Hazardous to Health Regulations (COSHH )2002
- Lifting Operations and Lifting Equipment Regulations (LOLER) 1998
- Reporting of Injuries, Diseases and Dangerous Occurrences Regulations (RIDDOR ) 1995
- Construction (Design and Management) Regulations (CDM) 2015
- Construction (Health, Safety and Welfare) Regulations 1996
- Manual Handling Operations Regulations 1992 as amended 2002
- Control of Noise at Work Regulations 2005
- Control of Vibration at Work Regulations 2005.